#RC Roll Cage kit by Plastic Performance Products. Very nice easy to assemble roll cage kit. $6.00 +S&H

#RC Assembled, painted (not included), and I added shrink wrap for padding (not included).

#WN Window Net kit from Plastic Performance Products. String and Ribbon type, flexible, no hardware. $4.00 + S&H

70/80's Nostalgic Decal Sheet. Also contains four (4) each of Goodyear Eagle, Hoosier, & McCreary tire decals.$8.00 + $2.00 S&H

SH-24 Hoosier dry transfers for tires by SHABO. $7.00 + S&H

SH-34McCreary dry transfers for tires by SHABO. $7.00 + S&H

SH-25 Hoosier Sprint dry transfers for tires by SHABO. $7.00 + S&H

PBP 1001 pre-wired distributor (red) $5.00 ea.

PBP 1002 pre -wired distributor (blue) $5.00 ea.

PBP 1003 pre -wired distributor (yellow) $5.00 ea.

PBP 1004 pre -wired distributor (black) $5.00 ea.

PBP 1005 pre -wired distributor (orange) $5.00 ea.

PBP 1006 pre -wired distributor (gray) $5.00 ea.

DTM 3244 Magneto (yellow) $6.00 ea.

DTM 3245 Magneto (red) $6.00 ea.

GM-001 Grill material 2 3/4" X3 1/2" $1.50 ea.

For a size example, I cut a piece and stuck it real quick in this grill opening.

MCG -703 Model Car Garage fine stainless steel wire mesh 2 3/4" X 3" $4.00 ea.

NM-01 Net Material 2-1/2" X 3-3/4" enough to do 6 possibly 8 window nets. $1.50 + S&H

DTM 2420 Carb linkage & hardware. $5.00 ea.

DTM 2320 Complete hood pin kit. Enough to do several cars. Includes scuff plates, clips and needles. $10.00 ea.

MCG 2098 Dash panel kit $11.00 ea.

RDU 2444 Coil over shock set. Same as I used on my 35 Chevy Sedan Modified. $4.00 a set (4 shocks & 4 springs)

Here's a fair shot of them. I used 1/16th brass rod for mounting studs.

Seat-01 Low back jalopy seat from James Brewer $2.00 ea.

Seat-02 Sprint car style seat $2.00 ea

Seat-03 Low back 70/80's stlye seat $2.00 ea.

Seat-04 80's Lowback mastered by Mark Jeffries $2.00 ea.

Seat-05 Lowback 80's Mastered by Mark Jeffries $2.00 ea.

Seat-06 70's/80's style ASA seat $2.00ea.

Seat-07 High back 70'/80/s seat mastered by Fred Sudlow $2.00 ea.

C-001

Large 4 barrell carb pre-drilled in package of 2 for $3.00 +S&H.

C-001

Top end view

C-001

Here's a shot of it on a motor sent to me by Chris Kauffman.

C-002

4 barrell carb, pre-drilled in package of 2 for $3.00 +S&H.

C-002

Top view

SI-01 Sprint style injection system $5 + shipping

OP-001

Deep sump oil pan for chevy big block mastered by Tony Dye. Package of 1 for $2.50 +S&H.

B-001

Assorted batteries, pack of 5, my choice, for $3.00 +S&H.

B-002 Boat box style batteries (2) pcs $1.50 + shipping

EB-01 8pc electrical boxes to build your own system. $5.00 + S&H.

VC-001

ASST. valve covers, MAY contain Plain, Weiland, Moroso, or Edelbrock. My pick at this price! 5 sets for $5.00 +S&H.

FC-001 Fuel Cell

H1/2 X W7/8 X D1/2 package of 1 for $2.50+S&H.

FC-002 Fuel Cell

H3/8 X W9/16 X D5/8 package of 1 for $2.50+S&H.

FC-003 Fuel Cell

H5/16 X W9/16 X D5/8 package of 1 for $2.50+S&H.

FC-004 Fuel Cell

H7/16 X W13/16 X D9/16 package of 1 for $2.50+S&H.

FC-005 Fuel Cell

Same measurements as FC-004 with different filler. Package of 1 for $2.50+S&H.

FC-006 Fuel Cell

H3/8 X W1-1/16 X D3/4 package of 1 for $2.50+S&H.

FC-07 Howe type fuel cell mastered by Mark Jeffries. $2.50 + S+H.

FCT-01 Fuel cell top for older NASCAR chassis or to box in your own. $1.50 + S&H

FCT-02 Fuel cell top for older NASCAR chassis or to box in your own. $1.50 + S&H

GC-01 4 Assorted Gas cans for your hauler or diorama. The assortment will vary from pack to pack, and....

will contain a combination of cans from these two photos. $3.00 per Pk.

Blocks: Concrete Blocks for display use. Pkg of 4 pcs.$3.00 + S&H

Helmets: 4 assorted helmets to add some detail to your car or diorama. Paint them up and add a visor and your set. $2.00 + shipping.